Autodesk Inventor Professional 2027
Version 2027.1 · Autodesk Inc. · Windows 10 / 11 (64-bit) · ranked #81 in the library
A parametric mechanical design package where a part is defined by dimensions and constraints you can change after the fact, assemblies snap together with real mechanical relationships, and the drawings update themselves when the model does.
Read the installation section below before you start. The order of the steps matters on this release.
About this release
Overview
Inventor is parametric solid modelling for mechanical design. A part is built from sketches with dimensions and geometric constraints, extruded and cut into features that sit in a history tree, and because every dimension is a parameter you can change any of them later and the model rebuilds. That is the whole idea: design intent is captured as relationships rather than fixed geometry, so a redesign is an edit rather than a rebuild from scratch.
Assemblies are where it earns its place in a machine shop. Parts are brought together with real mechanical constraints, mates, flush faces, insertions and joints that behave the way the actual mechanism would, so an assembly can be driven through its motion to check for interference before anything is cut. Large assemblies are handled with representations that simplify what you do not need to see, and the whole thing stays associative, so a change to a part ripples through every assembly it appears in.
The professional edition adds the analysis and specialised tooling: stress analysis to check a part will hold, frame generation for weldments, tube and pipe routing, cable and harness design, and sheet metal with a flat pattern that a laser cutter can read. Drawings are generated from the model and update when it changes. This build installs the full application with the professional toolsets and activation in place.
What it does
Feature breakdown
Parametric part modelling
Sketch driven features with dimensions and constraints in a history tree, so any dimension can be changed and the model rebuilds.
Assemblies with real constraints
Parts brought together with mechanical mates and joints, driven through their motion to check interference before manufacture.
Associative drawings
Drawings generated from the model that update automatically when the model changes, keeping documentation in step.
Stress analysis
Built in simulation to check that a part will hold under load, without exporting to a separate analysis package.
Sheet metal and frames
Sheet metal features with a flat pattern for cutting, and frame generation for weldments and structures.
Routed systems
Tube, pipe, cable and harness design tools for the professional edition, all associative with the assembly.
Changed in this build
Version 2027.1
- Faster large assembly performance with improved level of detail handling.
- Sheet metal flat pattern accuracy improved for complex bends.
- Stress analysis meshing made more robust on thin walled parts.
- Better exchange with the wider CAD ecosystem through updated translators.
- Drawing update speed improved on sheets with many views.
Installation
Follow these in order
- Disconnect from the network before starting.
- Extract the archive to a local drive with plenty of room.
- Disable real time protection for the whole process.
- Run setup as administrator and install with the professional toolsets.
- Apply the included activation step, then close the installer.
- Launch Inventor, confirm it opens with no licence prompt, then re-enable protection.
Release notes
From whoever packed it
- The licensing service is neutralised rather than removed. Do not let it update.
- A certified GPU and a current driver matter for large assembly performance.
- Install the toolsets you need during setup. Adding one later means running setup again.
System requirements
Minimum and recommended
| Operating system | Windows 10 version 22H2 or Windows 11, 64-bit |
|---|---|
| Processor | 3 GHz or faster, higher clock helps part modelling |
| Memory | 16 GB minimum, 32 GB recommended for large assemblies |
| Graphics | GPU with 4 GB VRAM and DirectX 11, on the certified list where possible |
| Storage | 40 GB of free space for a full install |
Questions about this release
Answered before you ask
- Does it do stress analysis?
- Yes, the professional edition includes built in simulation to check a part under load.
- Can it exchange with other CAD systems?
- Yes, through STEP, IGES and the direct translators, and it reads the common exchange formats.
- Will it run offline?
- Yes, once activated it runs fully offline.
Download
Pick a mirror